Power + Battery + Booster + Stereo old
This is just a short video I show to my non-refined setting for a home theater system. I had an old amp, my subs/6x9s around, and a battery, and decided to connect a power supply. It works very well, and if you have any old stuff around, I would suggest that the best of it and turned into a house-rattling installation. Good luck, YouTubers! (Edit) I have another video where I refined my set easily. All the reasons were grouped and 12V power from the power outlet, sothat there is more current to pass through the (theoretically from what I've read so far). I also noticed for trial and error that the system would rather turn the power off before removing the earth terminal of the battery. Everything else is wired and go immediately so that once the mass is connected, the amplifier is turned on, and begins to favor the signal to the woofer. I'm not 100% sure why, but when I connect my terminal, then turn on the PSU, my amp draw too much power fromthe battery in and click Auto-Protect. But when I turn on the AC adapter, then connect the terminal, everything sounds good. My multimeter contradict the theory that I had on this has been done to connect to the PSU led, the current flow was again out, and, indeed, the power supply and amplifiers are operated from the battery. Switched power initially reversed this effect in the battery power supply for the amplifier. Please let me know,... 9.9 Hp Outboards Quickly Best Buy Schonbek Chandeliers Imax 3d Nyc Right Now
No comments:
Post a Comment